Stormwater maintenance, repair, inspection and installation

Is Your Site’s Compliance Current?

We inspect, maintain, repair and install private stormwater systems.

Ponds, underground detention, treatment devices, permeable pavement, storm lines and lift stations. Measured against the adopted standard, with a clear scope and a documented record.

THE RESPONSIBILITY STARTS WITH THE OWNER
Private stormwater facilities carry inspection, maintenance and reporting obligations. We identify the condition, the applicable standard and the work your site needs.

THE RULEBOOK IS LOCAL
Requirements, inspection frequencies and enforcement come from your local jurisdiction.

Find Your Jurisdiction →

OUR MARKETS
Houston Austin San Antonio Seattle Tacoma Portland Los Angeles North Orange County South Orange County San Diego Riverside County · Santa Ana Riverside County · Santa Margarita

01 / What we find

Most systems have not been inspected or maintained since they were built.

Common findings on a first visit:

  • Detention pond forebay silted through; design storage volume gone
  • Stormwater pond outlet orifice blocked or modified – release rate no longer matches the approved design
  • Vault access hatches paved over, rusted shut, or built on
  • Stormwater treatment unit sump full and scouring out during storms
  • Bioretention surface sealed; water standing days after rain
  • No inspection records since construction
  • Permit still in a prior owner’s name

Owners usually find out when the site floods, a potential buyer’s engineer opens the vault, or a letter arrives.

Sediment measurement in the field

02 / Services

Four ways to bring your stormwater system under control.

Start with the work you need: a maintenance program, a new installation, an inspection record or a response to a notice.

Scheduled care · Cleanouts · Corrective work

Maintenance & Repair

Measured maintenance and repair for ponds, underground storage, treatment devices, pavement, conveyance and lift stations.

Explore maintenance & repair →

New construction · Retrofit · Replacement

Stormwater Control Measure Installation

Install stormwater storage, treatment and control systems to the approved plans, with access for future maintenance and closeout documentation.

Explore installation →

Annual · Semi-annual · Post-storm · Due diligence

Inspection & Reporting

Measure facility condition against the adopted standard. Receive photographs, prioritized findings and corrective actions, with certification where required.

See what an inspection covers →

Notice of violation · Failed inspection · Deadline

Violation Response

Start with the letter and its deadline. We assess the cited condition, scope corrective work and document the response for the reviewer.

Get help with a notice →

Find maintenance and repair for your system.

Explore the facility types we inspect, clean and repair.

03 / Markets

Four states. A local rulebook for every site.

Your stormwater system follows a local rulebook. Explore our market plans and compliance resources for California, Oregon, Texas and Washington. Find your city’s guide, then send the address to confirm service availability and scope.

California

From coastal sites to inland watersheds.

California stormwater requirements change across water board regions, counties and cities. Our California guides connect facility inspection, maintenance and documentation to the applicable local program.

  • Regional water board and local jurisdiction requirements
  • Post-construction BMPs, treatment systems and maintenance records
  • Guidance organized by city, county and applicable program

Oregon

Built around the facility and its maintenance plan.

Oregon properties can have different obligations based on the facility, approved plans and local stormwater program. Our Oregon guides help connect the facility, its maintenance plan and its local stormwater program.

  • Local stormwater manuals and approved operation and maintenance plans
  • Ponds, bioretention, treatment systems and underground facilities
  • City and service-district guides, plus statewide program resources

Texas

One state. Many drainage conditions and local rulebooks.

From Gulf Coast detention systems to Central Texas water-quality controls, the setting shapes the work. Our Texas guides address local requirements, site conditions and the records the property owner needs to maintain.

  • City, county and applicable TCEQ requirements
  • Detention, water-quality controls and Edwards Aquifer considerations
  • Measured maintenance, corrective work and inspection documentation

Washington

Measured condition. Locally applicable standards.

Washington stormwater programs put facility condition and maintenance documentation in focus. We connect field measurements and corrective work to the standards used by the local jurisdiction.

  • Ecology guidance and local stormwater maintenance standards
  • Sediment, debris, drawdown and treatment-system condition
  • Inspection records and maintenance planning for private facilities

04 / The deliverable

You are buying a defensible record.

The work matters. So does the record that shows what was measured, what was corrected and what comes next. Your service documentation includes:

  • Measured condition – sediment against design depth, sump against capacity, drawdown against standard, with the method noted
  • Photographs – dated, same vantage points each visit, so change is visible year over year
  • Finding, standard, action – each deficiency tied to the standard it violates, with the fix and the price
  • Disposal records – where removed material went, with volumes and manifests where applicable
  • A regulator-ready summary – formatted for the reviewer who reads it

What an inspection covers →

Stormwater inspection reporting

05 / Engagement

How a site comes under management

Step 01

Public records pulled

Permit status, approved drawings, recorded agreements, prior correspondence. Half the surprises are already in a public file.

Step 02

Baseline assessment

Measured condition survey of every facility, scored against the adopted standard. You get the deficiency list, the priority order and the cost to correct.

Step 03

Correction

Sediment removal, structure repair, media replacement, erosion work. Self-performed, disposal manifested, post-work photos from fixed positions.

Step 04

Program

Multi-year agreement: scheduled inspections on the permit calendar, post-storm response, annual reporting, and a budget built on measured accumulation rates.

We Think Downstream

Send the property address, your project plans or the notice you received. We will help scope the inspection, maintenance, repair or installation your site needs.